Details about Sony BDP-S1100 BDP-S3100 BDP-S4100 DVD multi region hack Blu-ray. Blu-ray player BDP-S1100-S5100 DVD region free. Hack and Slash Sony.

• Plays Standard DVDs from Any Region (0-8) • Plays Blu-Ray Discs from Any Region (A, B, & C) is Available • Worldwide Voltage (110-240 volts) for use in any Country • Fully encased optical drive provides high quality disc playback • Full HD 1080p Playback & DVD Up-conversion • Ethernet/LAN Connection • Streaming Media via Sony Ent. Network (Netflix, Pandora, etc.) • High Definition Audio • Front Panel USB Media Player • Supports AVCHD, MPEG-1, MPEG-2, MPEG-4, Motion JPEG, WMV9, XVID video formats.

• Power on the television and make sure it is tuned to the inputs to which the Blu-ray Disc player is connected. • Power on the Blu-ray Disc player. • If the Blu-ray Disc player starts to play a disc, press the 'STOP' button and wait until the xross media bar™ menu is displayed on the television before proceeding.

• Use the arrow keys on the remote control to select 'Setup' - 'System Settings', and then press the ENTER button. • Use the arrow keys to select 'Quick Start Mode' and make sure that the 'Quick Start Mode' is set to 'Off'. If the 'Quick Start Mode' is set to 'On', change the setting to 'Off'.

Otherwise, the firmware update may not succeed. • Use the arrow keys to select 'System Information', and then press the ENTER button. • The firmware version currently installed on the Blu-ray Disc player will be listed on the television screen.

If the last four digits of the version number are 0197 or higher, it is not necessary to install this firmware update. There are two ways to update the Blu-ray Disc player firmware: • Network Update: • The Network Update operation is straightforward. Sony highly recommends that you use the Network Update method. • You will need to connect the Blu-ray Disc player to your Internet source using an Ethernet cable. • Please see the section below, for more information. • Disc Update: • If you cannot connect the Blu-ray Disc player to your Internet source, please use the disc update method. • Please see the section below, for more information.

If you have questions or require assistance, please contact Sony Support at 1-866-909-SONY (7669). The Network Update operation is straightforward. Sony highly recommends that you use the Network Update method to update the Blu-ray Disc player firmware. • Important Notes • If you have not done so already, please to determine if this firmware update is needed for your Blu-ray Disc player. Please follow the update instructions carefully. Failure to follow the instructions may interrupt the update process and may cause the Blu-ray Disc player to be unresponsive or to require repair. Do not power off the Blu-ray Disc player or disconnect it from the AC power outlet.

Loss of power during the installation of the firmware update may cause the Blu-ray Disc player to be unresponsive or to require repair. • In order to use this update method it is necessary to have the player correctly connected to an active Internet connection.

Note: If you cannot connect the player to your Internet source, please see the section below for information about firmware update disc options. • In order to perform the firmware update, it is necessary to have the player correctly connected to a compatible television. • It is highly recommended that you print out these instructions for use as a reference during the installation process. • Network Update Instructions WARNING!! Please follow the update instructions carefully. Failure to follow the instructions may interrupt the update process and may cause the Blu-ray Disc player to be unresponsive or to require repair.

Note: The firmware update process usually takes about 15 to 30 minutes, depending on system configuration and network connection. • Power on the television and make sure it is tuned to the inputs to which the Blu-ray Disc player is connected.

Telecharger Dreamweaver 8 Gratuit Avec Serial Number there. • Connect the 'LAN(100)' terminal on the player to your Internet source using an Ethernet cable. • Power on the Blu-ray Disc player. • If there is a disc in the player, please remove the disc. • At the xross media bar™ menu, use the arrow keys on the remote control to select 'Setup' - 'Network Update' and then press the ENTER button.